FEEDBACKER

Lets a note ring out into feedback on command.

What it does

FEEDBACKER generates feedback, as if a loud amp were making your note sing on. In NORMAL it listens to your note and builds feedback from its pitch. In OSC it creates a simulated feedback tone internally.

TRIGGER switches the feedback on.

How to use it

  • Hold a long note and set TRIGGER to ON to let the feedback rise.
  • In OSC, raise RISE TIME for a calm build-up, lower it for an instant jump.
  • In OSC, use OCT FEEDBACK for a second, higher feedback tone as an extra effect.
  • In OSC, raise VIB DEPTH a little for a singing, living tone.

Where it goes in the chain

Put FEEDBACKER before the amp and the delay, so the feedback is distorted along with it and sits in the space.

Starting points

Calm build-up

MODE OSC · TRIGGER ON · FEEDBACK 50 · RISE TIME 70 · VIB DEPTH 8

The feedback rises slowly and sings out calmly.

Fast feedback

MODE OSC · TRIGGER ON · RISE TIME 30 · OCT RISE TIME 30 · OCT FEEDBACK 40

The note jumps quickly to a singing tone with an extra octave.

From your own note

MODE NORMAL · TRIGGER ON · DEPTH 70

The feedback is built from the pitch of your note.

Every setting

SettingRangeWhat it does
MODENORMAL / OSCNORMAL listens to the pitch of your note and builds feedback from it. OSC creates a simulated feedback tone and starts once a single note has settled.
TRIGGEROFF / ONApplies the feedback when you set it to ON. Set it back to OFF to stop the feedback.
DEPTH0 to 100Only in NORMAL. How readily the feedback starts when the effect is on. Higher gives feedback more easily.
RISE TIME0 to 100Only in OSC. Time the feedback needs to reach full volume. Low is fast, high is slow.
OCT RISE TIME0 to 100Only in OSC. The same for the feedback one octave higher. Low is fast, high is slow.
FEEDBACK0 to 100Only in OSC. Volume of the feedback sound. Higher gives a stronger singing tone.
OCT FEEDBACK0 to 100Only in OSC. Volume of the feedback one octave higher. Higher gives more of the second tone.
VIB RATE0 to 100Only in OSC. Speed of the vibrato during the feedback. Higher is faster.
VIB DEPTH0 to 100Only in OSC. Depth of the vibrato during the feedback. Low is subtle, high sways more.

The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. FEEDBACKER in the BOSS Parameter Guide · GX-100 manuals at BOSS

Turn it yourself?

In GX Board, FEEDBACKER is a device in your rack, with all its controls on the front.

Download for Mac