AUTO WAH
A wah that sweeps back and forth by itself at a set speed.
What it does
The AUTO WAH is a filter that sweeps up and down by itself, with no pedal and no need for your picking. You set the speed with RATE. It gives a floating, quacking movement under your playing.
FILTER MODE chooses how the filter sounds.
How to use it
- Set a slow RATE for a floating movement under long chords.
- Set it to the tempo of the song for a quack in time.
- Use a low DEPTH for a subtle movement.
- Use the HPF setting for a thinner, sharper effect.
Where it goes in the chain
Usually first in the chain, before the drives, so the filter works on your guitar signal.
Starting points
Slow float
FILTER MODE LPF · RATE 20 · DEPTH 60 · FREQUENCY 40 · RESONANCE 40 · WAVEFORM SINE
A soft, warm movement under long chords.
Quacking wah
FILTER MODE BPF · RATE 50 · DEPTH 80 · RESONANCE 65 · WAVEFORM TRI
A clear, rhythmic wah in time.
Thin and sharp
FILTER MODE HPF · RATE 40 · DEPTH 50 · FREQUENCY 60 · DIRECT MIX 20
A thin, shimmering movement.
Every setting
| Setting | Range | What it does |
|---|---|---|
| FILTER MODE | LPF / BPF / HPF | LPF lets the low notes through and sounds round and warm. BPF lets the mid range through and sounds like a wah. HPF lets the highs through and sounds thin. |
| RATE | 0 / 1 / 2 / 3 … 1/16T / 1/32 (119 steps) | The speed of the movement, from slow to fast or in note values. Slow floats, fast flutters. Pick a value that fits the tempo of the song. |
| DEPTH | 0 to 100 | How far the filter sweeps. Low is a small movement, high a wide sweep. |
| EFFECT LEVEL | 0 to 100 | The volume of the filtered sound. At 100 you hear it fully. Set it lower to blend. |
| FREQUENCY | 0 to 100 | The centre point of the movement. Low gives a darker, high a brighter sound. |
| RESONANCE | 0 to 100 | The emphasis on the filter peak. Low sounds soft, high sharp and nasal. Too high can whistle. |
| WAVEFORM not verified | TRI / SINE | The shape of the movement. TRI sweeps in straight lines, SINE in a smooth curve. |
| DIRECT MIX | 0 to 100 | Blends the untouched signal in with the effect. 0 is filter only. More keeps the note clear. |
The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. AUTO WAH in the BOSS Parameter Guide · GX-100 manuals at BOSS
More in Wah and filter
Turn it yourself?
In GX Board, AUTO WAH is a device in your rack, with all its controls on the front.