BASS WAH bass

A wah pedal for bass that keeps the low range in the wah sound.

The version for guitar: WAH

What it does

A wah is a filter you open and close with a pedal. It gives the bass a ringing, talking tone. This wah is made for the bass register and includes the low range, so the effect stays full.

DIRECT MIX blends your clean sound in. PEDAL MIN and PEDAL MAX set the tone at the heel and toe ends of the pedal.

How to use it

  • For funky, talking lines: play the pedal along with the rhythm.
  • Use DIRECT MIX to blend in your clean bass when you want less of the effect.
  • Park the pedal in one position for a fixed, nasal tone.
  • Limit the range with PEDAL MIN and PEDAL MAX for a subtler effect.

Where it goes in the chain

Put it after the compressor and before the drive and amp, like a wah pedal. That way the drive reacts to the moving filter.

Starting points

Funk wah

EFFECT LEVEL 100 · DIRECT MIX 40 · PEDAL MIN 20 · PEDAL MAX 80

Talking, with the bottom of the bass kept in.

Fixed nasal tone

PEDAL POSITION 60 · DIRECT MIX 50 · EFFECT LEVEL 80

The pedal parked in one position for a tone of its own.

Every setting

SettingRangeWhat it does
EFFECT LEVEL0 to 100The volume of the filtered sound. Higher is more wah.
DIRECT MIX0 to 100The volume of your clean bass. Higher gives more of your own sound, at 0 you hear only the wah.
PEDAL POSITION0 to 100The position of the wah pedal. You use it once it is assigned to an expression pedal or similar controller.
PEDAL MIN0 to 100The tone when the heel of the pedal is down.
PEDAL MAX0 to 100The tone when the toe of the pedal is down.

The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. BASS WAH in the BOSS Parameter Guide · GX-100 manuals at BOSS

Turn it yourself?

In GX Board, BASS WAH is a device in your rack, with all its controls on the front.

Download for Mac